Although all of the accessories range has been styled to suit the e-scape product family many of the units can in fact be used on any existing desk.

NB: Those universal accessories will be shortly released, along with further additions, as a separate product range labelled 'accessories'.

DESK AND CABLE ACCESSORIES

The Cable Beam acts as a structural member and is recommended on desks wider than 140Omm. It comes with fittings in place to accept standard hard-wired power boards or with facilities to permit soft wiring harnesses. Cables enter the Beam at any point along its length, (i.e. the rear of the desk) and can exit the beam from cut outs along the front side. Cables can then be directed to a built-in power board, to other peripherals or to the
rotating CPU Holder.

A Cable Separator is a further upgrade to the Cable Beam, permitting division between power, data and voice cables. The Cable Separator is adjustable allowing you to determine how much space is allocated to each division.

A 4 Outlet Standard Power Board can be ordered and comes face-mounted to the beam, providing built-in concealed power. Different national plug configurations are available.

To permit compliance to non-mandatory desk electrical standards we also offer further specialised parts, including a Cable Spine for the concealed ducting of cables to the floor and cable ties and clamps and cable bridges. Speak to us about your specialised requirements.

To add an 800mm Cable Port in the centre rear of the desk, specify when ordering. This is not usually necessary, but may be desirable in large cluster configurations with desks back to back. Alternatively, desks may just stand off from each other a little to permit cables to enter the Cable Beam.

MODESTY PANELS

Optional Modesty Panels come in a range of sizes to suit the various desk widths. The hole pattern of the Modesty Panels can also accept various hang-on accessories, like the Phone/Speaker Shelf. Modesty Panels come complete with modesty clips that attach desk legs to the Modesty Panels and provide a cable exit point to neatly keep cables together en route to the ground. It is necessary to order the Cable Beam to hold the Modesty Panel.

TOOL SCREENS

Tool Screens can be fitted to desks either permanently (by drilling the desktop and fitting Mounting Pins) or temporarily by using the desk clamp. Tool Screens maintain the look of the rest of the range, are semiprivate and accept other accessories using the hole pattern.
Tool Screens come in four widths to suit desks 1200mm, 1400mm, 1600mm and 1800mm

LETTER TRAYS AND PHONE/SPEAKER SHELF

Ideal companions to the Tool Screens are the Letter Trays and the Phone/Speaker Shelf.

DESKTOP SCREENS (FABRIC)

Desktop Screens can be fitted to desks either permanently (by drilling the desktop and fitting Mounting Pins) or temporarily by using the Desk Clamp. Screens come in five sizes to fit the 4 common desk widths and one to suit the Boomerang Desk. Tops may be either Straight or Wavetop. All screens are pinnable and are covered in your choice of fabric. Sometimes a screen that does not run the full width of the desk may be preferable, permitting team workers to talk across the desk. When ordering specify methods of connection. You will need two clamps or two pins per screen.

PIVOT CUBE

The Pivot Cube attaches to the leg of the desk to contain A4 sized paper. It rotates through 360 degrees. Spin it out for work or back under for storage. Can be fitted left or right handed.

CASTORS

75mm Castors may be fitted to desk legs, please specify when ordering. Castors will change the height range of the desks, adding 85mm. Castors are not recommended on desks and tables less than 1200mm wide.

MONITOR SKATE

Monitor Skate puts wheels under your monitor and is height adjustable . More stable than a monitor arm, more mobile than a monitor platform. Monitor Skate lets you clear your desktop space for bookwork, keeps your hardware just an arms length away.

FREEFORM LCD ARM

Slim and stylish, just like your LCD screen. The Freeform LCD Arm uses the standard VESA mounting positions (both 75mm and 1 0Omm) fits most popular makes of LCD Screen. Comes with quick release plate for rapid removal. Both base and head rotate 360 degrees. That means you can spin your monitor from landscape to portrait format. Once in position movements may be locked or left in the free-floating mode. Mounts through the desktop, (clamp versions coming shortly). Custom bases available for connection to proprietary furniture and slatwall. Custom head options available for mounting of non-VESA screens.

CD TOWER

Stylish, robust and practical the CD Tower holds Letter Trays or CD's in any combination of up to 20 positions. Rotates for easy access. Mounts to any position on the desk, using the universal Desk Clamp and can be removed or relocated at any time.

CPU HOLDER

Spins around to provide easy access to cables and plugs. All Desks come with brass inserts in place to accept the CPU Holder. Holds all popular makes of tower CPU'S. Floor of the unit adjusts to snugly fit any commonly sized Tower up to 225mm wide x 485mm high. Optional locking Plates (pair) secures your
CPU from theft.
The CPU Holder completes the look of the desk and acts as a side modesty panel.

DESK CLAMP

The Universal Desk Clamp provides secure temporary connection to the furniture. Fits furniture from 20mm
to 68mm thick. Final adjustment is from the top, that means no
crawling under desks to attach accessories:
• Tool Screens
• Desktop (Fabric) Screens
• CD Tower
Alternately elements of the Desk Clamp can also be used to create
wall mounts and pin mounts.

KEYBOARD SUPPORT

links two desks or desk and return
to provide a handy and stable keying platform. Creates extra desk space and lets you place the monitor in the "dead" corner of the desk. Fits any 25mm desk.

With 13 height settings the Monitor Skate fits all Monitors and provides ergonomic height adjustment to avoid annoying glare problems caused by reflections. Made of robust powdercoated steel the Monitor Skate is the ideal companion to even the heaviest monitors.

MONITOR REARGUARD

Protects the back of your monitor from prying fingers and conceals the cable jungle. Comes with a built-in grounding cord to dissipate e-field ELF and VLF radiation which comes from the back of the monitor, (the largest source of this radiation).

BRIDGE

Links two desks together and provides a lower height platform for mounting bulky IT hardware. Perfect for large printers as it puts printouts at hand without leaving your seat. Comes in either a Straight or Corner Bridge.